Version 1 (modified by 6 years ago) ( diff ) | ,
---|
Repository Administration
Quick start
- Enable the repository connector(s) for the version control system(s) that you will use.
- Add repositories through the Repositories admin panel, with
trac-admin
or in the[repositories]
section of trac.ini. - Set up a call to
trac-admin $ENV changeset added $REPO $REV
in the post-commit hook of each repository. Additionally, add a call totrac-admin $ENV changeset modified $REPO $REV
in the post-revprop-change hook of repositories allowing revision property changes. - Make sure the user under which your hooks are run has write access to the Trac environment, or use a tool like
sudo
to temporarily elevate privileges.
Enabling the components
Support for version control systems is provided by optional components distributed with Trac, which are disabled by default (since 1.0). Subversion and Git must be explicitly enabled if you wish to use them.
The version control systems can be enabled by adding the following to the [components]
section of your trac.ini, or enabling the components in the Plugins admin panel.
tracopt.versioncontrol.svn.* = enabled
tracopt.versioncontrol.git.* = enabled
Specifying repositories
Trac supports multiple repositories per environment, and the repositories may be for different version control system types. Each repository must be defined in a repository configuration provider, the two supported by default are the database store and the trac.ini configuration file. A repository should not be defined in multiple configuration providers.
It is possible to define aliases of repositories, that act as "pointers" to real repositories. This can be useful when renaming a repository, to avoid breaking links to the old name.
A number of attributes can be associated with each repository. The attributes define the repository's location, type, name and how it is displayed in the source browser. The following attributes are supported:
Attribute | Description |
---|---|
alias
| A repository having an alias attribute is an alias to a real repository. All TracLinks referencing the alias resolve to the aliased repository. Note that multiple indirection is not supported, so an alias must always point to a real repository. The alias and dir attributes are mutually exclusive.
|
description
| The text specified in the description attribute is displayed below the top-level entry for the repository in the source browser. It supports WikiFormatting.
|
dir
| The dir attribute specifies the location of the repository in the filesystem. It corresponds to the value previously specified in the option [trac] repository_dir . The alias and dir attributes are mutually exclusive.
|
hidden | When set to true , the repository is hidden from the repository index page in the source browser. Browsing the repository is still possible, and links referencing the repository remain valid.
|
sync_per_request | When set to true the repository will be synced on every request. This is not recommended, instead a post-commit hook should be configured to provide explicit synchronization and sync_per_request should be set to false .
|
type | The type attribute sets the type of version control system used by the repository. Trac supports Subversion and Git out-of-the-box, and plugins add support for many other systems. If type is not specified, it defaults to the value of the [trac] repository_type option.
|
url | The url attribute specifies the root URL to be used for checking out from the repository. When specified, a "Repository URL" link is added to the context navigation links in the source browser, that can be copied into the tool used for creating the working copy.
|
A repository name
and one of alias
or dir
attributes are mandatory. All others are optional.
For some version control systems, it is possible to specify not only the path to the repository in the dir
attribute, but also a scope within the repository. Trac will then only show information related to the files and changesets below that scope. The Subversion backend for Trac supports this. For other types, check the corresponding plugin's documentation.
After adding a repository, the cache for that repository must be re-synchronized once with the trac-admin $ENV repository resync
command.
repository resync <repos>
- Re-synchronize Trac with a repository.
In trac.ini
Repositories and repository attributes can be specified in the [repositories]
section of trac.ini. Every attribute consists of a key structured as {name}.{attribute}
and the corresponding value separated with an equal sign (=
). The name of the default repository is empty.
The main advantage of specifying repositories in trac.ini
is that they can be inherited from a global configuration (see the global configuration section of TracIni). One drawback is that, due to limitations in the ConfigParser
class used to parse trac.ini
, the repository name is always all-lowercase.
The following example defines two Subversion repositories named project
and lib
, and an alias to project
as the default repository. This is a typical use case where a Trac environment previously had a single repository (the project
repository), and was converted to multiple repositories. The alias ensures that links predating the change continue to resolve to the project
repository.
[repositories] project.dir = /var/repos/project project.description = This is the ''main'' project repository. project.type = svn project.url = http://example.com/svn/project project.hidden = true lib.dir = /var/repos/lib lib.description = This is the secondary library code. lib.type = svn lib.url = http://example.com/svn/lib .alias = project
Note that name.alias = target
makes name
an alias for the target
repo, not the other way around.
In the database
Repositories can also be specified in the database, using either the "Repositories" admin panel under "Version Control", or the trac-admin $ENV repository
commands.
The admin panel shows the list of all repositories defined in the Trac environment. It allows adding repositories and aliases, editing repository attributes and removing repositories. Note that repositories defined in trac.ini
are displayed but cannot be edited.
The following trac-admin commands can be used to perform repository operations from the command line.
repository add <repos> <dir> [type]
-
Add a repository
<repos>
located at<dir>
, and optionally specify its type.
repository alias <name> <target>
-
Create an alias
<name>
for the repository<target>
.
repository remove <repos>
-
Remove the repository
<repos>
.
repository set <repos> <key> <value>
-
Set the attribute
<key>
to<value>
for the repository<repos>
.
Note that the default repository has an empty name, so it will likely need to be quoted when running trac-admin
from a shell. Alternatively, the name "(default)
" can be used instead, for example when running trac-admin
in interactive mode.
Repository caching
The Subversion and Git repository connectors support caching, which improves the performance browsing the repository, viewing logs and viewing changesets. Cached repositories must be synchronized; either explicit or implicit synchronization can be used. When searching changesets, only cached repositories are searched.
Subversion repositories are cached unless the type is direct-svnfs
. Git repositories are cached when [git]
cached_repository is true
.
Repository synchronization
Prior to 0.12, Trac synchronized its cache with the repository on every HTTP request. This approach is not very efficient and not practical anymore with multiple repositories. For this reason, explicit synchronization through post-commit hooks was added.
There is also new functionality in the form of a repository listener extension point (IRepositoryChangeListener) that is triggered by the post-commit hook when a changeset is added or modified, and can be used by plugins to perform actions on commit.
Mercurial Repositories
Please note that at the time of writing, no initial resynchronization or any hooks are necessary for Mercurial repositories - see #9485 for more information.
Explicit synchronization
This is the preferred method of repository synchronization. It requires setting the sync_per_request
attribute to false
, and adding a call to trac-admin
in the post-commit
hook of each repository. Additionally, if a repository allows changing revision metadata, a call to trac-admin
must be added to the post-revprop-change
hook as well.
changeset added <repos> <rev> […]
- Notify Trac that one or more changesets have been added to a repository.
changeset modified <repos> <rev> […]
- Notify Trac that metadata on one or more changesets in a repository has been modified.
The <repos>
argument can be either a repository name (use "(default)
" for the default repository) or the path to the repository.
Note that you may have to set the environment variable PYTHON_EGG_CACHE
to the same value as was used for the web server configuration before calling trac-admin
, if you changed it from its default location. See Trac Plugins for more information.
Subversion
The following examples are complete post-commit and post-revprop-change scripts for Subversion. They should be edited for the specific environment, marked executable (where applicable) and placed in the hooks
directory of each repository. On Unix (post-commit
):
#!/bin/sh export PYTHON_EGG_CACHE="/path/to/dir" /usr/bin/trac-admin /path/to/env changeset added "$1" "$2"
Note: Check with whereis trac-admin
, whether trac-admin
is really installed under /usr/bin/
or maybe under /usr/local/bin/
and adapt the path.
On Windows (post-commit.cmd
):
@C:\Python26\Scripts\trac-admin.exe C:\path\to\env changeset added "%1" "%2"
The post-revprop-change hook for Subversion is very similar. On Unix (post-revprop-change
):
#!/bin/sh export PYTHON_EGG_CACHE="/path/to/dir" /usr/bin/trac-admin /path/to/env changeset modified "$1" "$2"
On Windows (post-revprop-change.cmd
):
@C:\Python26\Scripts\trac-admin.exe C:\path\to\env changeset modified "%1" "%2"
The Unix variants above assume that the user running the Subversion commit has write access to the Trac environment, which is the case in the standard configuration where both the repository and Trac are served by the web server. If you access the repository through another means, for example svn+ssh://
, you may have to run trac-admin
with different privileges, for example by using sudo
.
Note that calling trac-admin
in your Subversion hooks can slow down the commit and log editing operations on the client side. You might want to use the contrib/trac-svn-hook script which starts trac-admin
in an asynchronous way. The script also comes with a number of safety checks and usage advices which should make it easier to set up and test your hooks. There's no equivalent trac-svn-hook.bat
for Windows yet, but the script can be run by Cygwin's bash.
See the section about hooks in the Subversion book for more information. Other repository types will require different hook setups.
Git
Git hooks can be used in the same way for explicit syncing of Git repositories. If your git repository is one that gets committed to directly on the machine that hosts trac, add the following to the hooks/post-commit
file in your git repo (note: this will do nothing if you only update the repo by pushing to it):
#!/bin/sh REV=$(git rev-parse HEAD) trac-admin /path/to/env changeset added <repos> $REV
Alternately, if your repository is one that only gets pushed to, add the following to the hooks/post-receive
file in the repo:
#!/bin/sh tracenv=/path/to/env # change with your Trac environment's path repos= # change with your repository's name while read oldrev newrev refname; do if [ "$oldrev" = 0000000000000000000000000000000000000000 ]; then git rev-list --reverse "$newrev" -- else git rev-list --reverse "$newrev" "^$oldrev" -- fi | xargs trac-admin "$tracenv" changeset added "$repos" done
The <repos>
argument can be either a repository name (use "(default)
" for the default repository) or the path to the repository.
Mercurial
For Mercurial, add the following entries to the .hgrc
file of each repository accessed by Trac (if TracMercurial is installed in a Trac plugins
directory, download hooks.py and place it somewhere accessible):
[hooks] ; If mercurial-plugin is installed globally commit = python:tracext.hg.hooks.add_changesets changegroup = python:tracext.hg.hooks.add_changesets ; If mercurial-plugin is installed in a Trac plugins directory commit = python:/path/to/hooks.py:add_changesets changegroup = python:/path/to/hooks.py:add_changesets [trac] env = /path/to/env trac-admin = /path/to/trac-admin
Per-request synchronization
If the post-commit hooks are not available, the environment can be set up for per-request synchronization. In that case, the sync_per_request
attribute for each repository in the database and in trac.ini must be set to false
.
Note that in this case, the changeset listener extension point is not called, and therefore plugins using it will not work correctly.
Automatic changeset references in tickets
You can automatically add a reference to the changeset as a ticket comment whenever changes are committed to the repository. The description of the commit needs to contain one of the following formulas:
Refs #123
- to reference this changeset in#123
ticketFixes #123
- to reference this changeset and close#123
ticket with the default status fixed
This functionality requires installing a post-commit hook as described in #ExplicitSync, and enabling the optional commit updater components by adding the following line to the [components]
section of your trac.ini, or enabling the components in the Plugins admin panel.
tracopt.ticket.commit_updater.* = enabled
For more information, see the documentation of the CommitTicketUpdater
component in the Plugins admin panel and the CommitTicketUpdater page.
Troubleshooting
My trac-post-commit-hook doesn't work anymore
You must now use the optional components from tracopt.ticket.commit_updater.*
, which you can activate through the Plugins panel in the Administrative part of the web interface, or by directly modifying the [components] section in the trac.ini. Be sure to use explicit synchronization as explained above.
See CommitTicketUpdater#Troubleshooting for more troubleshooting tips.