[[PageOutline]] = GeniusWebPython = ''GeniusWeb'' is an open architecture for negotiation via the internet. The core of the architecture is a JSON based communication protocol that standardizes the communication messages comprising a negotiation. This project contains a [https://www.python.org/downloads/ c-python-3]-based implementation of GeniusWeb core objects. It allows easy (de)serialization of many data structures needed for negotiation in GeniusWeb. Some data structures have not yet been implemented in GeniusWebPython, this will be done as needed. Please contact us if you need some missing classes. A specification and full reference implementation in java of the GeniusWeb core is available [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb here] {{{#!td style="background: #fee" This is an early version of GeniusWebPython. The bidspace and protocols have not yet been fully ported to GeniusWebPython. Therefore implementing a GeniusWebPython party may involve more programming effort than implementing a java party in GeniusWeb. }}} == Installation To compile and test parties you need [https://www.python.org/downloads/ python (3.8 or 3.9)]. We recommend using an IDE for development and debugging, such as Eclipse with PyDev or PyCharm. If you want a GeniusWebPythonPartiesServer we recommend you check its [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWebPythonPartiesServer/wiki/WikiStart#Installation python installation requirements]. == Security considerations GeniusWebPython assumes python parties are packaged using the standard tar.gz distribution format. This implies that the package is not fully self-contained: it requires dependent libraries to be installed separately, according to setup.py included in the package. This dependency on later installation steps poses an additional security risk compared to the fully self-contained java jar packaging. = Overview of the available core objects Most classes in the python core are explained in the java reference implementation: ||= class =||= wiki reference =|| ||actions||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Actions wiki actions]|| ||bidspace||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb#BidSpace wiki bidspace]|| ||issuevalue||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#issuevalue wiki issuevalue]|| ||inform||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Inform wiki inform]|| ||deadline||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Timeline wiki deadline]|| ||progress||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Timeline wiki progress]|| ||protocol||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb#Protocol wiki protocol]|| ||connection||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Connection wiki connection]|| ||party||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#Party wiki party] and see below for details on writing a party|| ||partystdio||a module to support running a party using pythons stdin and stdout|| ||profile||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#profile wiki profile]|| ||profileconnection||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#ProfileConnectionFactory wiki profileconnection]|| ||references||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb/wiki/WikiStart#References wiki references]|| ||voting||see [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb#Voting wiki voting]|| = Example Parties Example parties can be found [source:/exampleparties here]. Many of these are also included with the [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWebPythonPartiesServer parties server] to provide basic functionality. Below is a table showing the currently available example parties and their properties. Notice, "Supported profile types" gives the class names of all supported types, so for instance "PartialOrdering" means all subclasses of PartialOrdering which also includes all UtilitySpaces. ||= Party =||= Protocol =||= Supported profile types =||= Parameters (default value) =|| ||RandomParty||SAOP, Learn||LinearAdditive||minPower (2), maxPower (infinity). Used to control voting behaviour|| ||stupidparty||SAOP||LinearAdditive||-|| == Writing a party Example parties can be found [source:/exampleparties here]. You can easily clone a party with SVN using {{{svn co https://tracinsy.ewi.tudelft.nl/pub/svn/GeniusWebPython/exampleparties/randomparty/}}} (this clones randomparty, use a different name to fetch another example). After cloning, create your venv and install the requirements, eg {{{ cd randomparty python3 -m venv venv source venv/bin/activate pip install -r requirements.txt }}} You can now run the junit tests. You may have to take different or additional steps if you use an IDE like eclipse with pydev, or pycharm. A party is compiled with python. Compile with {{{python3 setup.py sdist}}}. This gives you a you get a {{{dist/yourparty-X.Y.Z.tar.gz}}} that can be copied into the pypartiesserver for deployment. The basic structure of a party that supports the SAOP behaviour looks like this {{{#!python class RandomParty (DefaultParty): """ Offers random bids until a bid with sufficient utility is offered """ def __init__(self): super().__init__() self.getReporter().log(logging.INFO,"party is initialized") self._profile = None self._lastReceivedBid:Bid = None def notifyChange(self, info: Inform): #self.getReporter().log(logging.INFO,"received info:"+str(info)) if isinstance(info,Settings) : settings:Settings=cast(Settings,info) self._me = settings.getID() self._protocol:str = str(settings.getProtocol().getURI()) self._progress = settings.getProgress() if "Learn" == self._protocol: self.getConnection().send(LearningDone(self._me)) else: self._profile = ProfileConnectionFactory.create(info.getProfile().getURI(), self.getReporter()) elif isinstance(info, ActionDone): action:Action=cast( ActionDone,info).getAction() if isinstance(action, Offer): self._lastReceivedBid = cast(Offer, action).getBid() elif isinstance(info, YourTurn): self._myTurn() if isinstance(self._progress, ProgressRounds) : self._progress = self._progress.advance() elif isinstance(info, Finished): self.terminate() else: self.getReporter().log(logging.WARNING, "Ignoring unknown info "+str(info)) def getCapabilities(self) -> Capabilities: return Capabilities( set([ "SAOP", "Learn"]), set(['geniusweb.profile.utilityspace.LinearAdditive'])) def getDescription(self) -> str: return "Offers random bids until a bid with sufficient utility is offered" def _myTurn(self): if self._isGood(self._lastReceivedBid) : action = Accept(self._me, self._lastReceivedBid) else: for _attempt in range(20): bid = self._getRandomBid(self._profile.getProfile().getDomain()) if self._isGood(bid): break action = Offer(self._me, bid); self.getConnection().send(action) def _isGood(self, bid:Bid)->bool: profile = self._profile.getProfile() return profile.getUtility(bid) > 0.6 ... }}} Notice, above is slightly simplified code, for fully working code check the [source:exampleparties/randomparty/randomparty/RandomParty.py source code]. A party can directly use the Inform and Actions. This allows proper type checking of all the Party's code, and saves the programmer from interpreting JSON structures. The party must follow the behaviours that it promises. The example above folows the SAOP behaviour. Use the logger for outputting messages from your party. {{{#!td style="background: #fee" Do not use stdin and stdout/print in your party. These are used for communicating with the partyserver. Using them will disturb that communication and most likely result in your party requesting illegal actions. Executing an illegal action will result in your party being killed by the protocol. }}} === Logging The log file name can be set by the party in its constructor. If it uses the default (None), then the party main class name is used as log filename, and {{{.log}}} as extension. So assuming your party main class is RandomParty, Logs are written to a file named RandomParty.log in the current working directory of the JVM (normally the directory from where you start up the tomcat server). === Throwing exceptions A special warning is in place regarding throwing exceptions from your implementation, particularly from notifyChange. In line with the general Listener interface, exceptions are only logged and your party usually is immediately disconnected if it throws any exception. Make sure that you free up any used resources to avoid memory leaks if you really need to throw an exception. === Preparing the tar.gz file Your party has to be packaged as a standard tar.gz file for deployment on the [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWebPythonPartiesServer pypartiesserver]. In contrast with java, python tar.gz files do not contain their dependent libraries. References to the dependent libraries are stored in the setup.py program inside the tar.gz file. The pypartiesserver runs a standard {{{pip install }}} to install your party for use. Your tar.gz file must contain a {{{party.py}}} program in the root of the project, defining a function party() that returns your main class, like this: {{{ from randomparty.RandomParty import RandomParty def party(): return RandomParty }}} Of course you should replace RandomParty with your party's main class name but the file name must stay {{{party.py}}}. Refer to [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWebPythonPartiesServer#AddingorchangingaParty install new party] to deploy your party.tar.gz on the pythonpartiesserver. == Using PyDev in Eclipse We recommend you use an IDE, eg Eclipse or PyCharm, to develop your python parties. Configuring Eclipse is quite elaborate, here is an outline but check other tutorials and videos for more details. * Start Eclipse and select your workspace * Install PyDev. Go to Eclipse MarketPlace and search for PyDev. Click on Install and follow the instructions. * Download an example project as usual in Eclipse: * Install an SVN client if you don't have one installed. Go to Eclipse MarketPlace and search for subclipse. Click on Install and follow the instructions. Also follow the javahl installation instructions. This will involve separate software as well. * Import the project: * click File/Import/SVN/Checkout Projects from SVN. Click Next, * select Create a new repository location and Next. Enter e.g. https://tracinsy.ewi.tudelft.nl/pub/svn/GeniusWebPython/exampleparties/randomparty. * Select the root folder and Finish. * Select General/Project, Next, enter some project name "demo", Finish * Create a virtual env for python * open terminal * Go the project workspace * {{{python3 -m venv venv; source venv/bin/activate; pip install -r requirements.txt}}} * Set up Eclipse env * Window/Preferences/PyDev/Interpreters/Python Interpreter * New/Browse for python/pypy.exe * Browse to the venv/bin/python3 file you created * enter interpreter name, eg your project name "demo" * check also the site-packages and click OK * PyDev/Editor/Code Analysis/Mypy and check "Use Mypy?" * Apply and close * Configure your project * Right click on demo project in navigator or project explorer * PyDev/Set as PyDev Project * Right click on demo project in navigator or project explorer and select "Properties" * Select PyDev/PyDev Interpreter Grammar * Select the Interpreter "demo". * Click on PyDev-PYTHONPATH * Click Add source folder and select the demo folder (the root of the demo project) * Go to PyDev/Editor/ Your project is now ready for programming. Run the unit tests by right-clicking the test folder and selecting Run As/Python unit test. = Stand-alone running Stand-alone running works similar as in java. * Ensure you pip-installed the geniuswebcore (2.0.1 or higher) * The parties you want to run must be python-based (using GeniusWebPython, not GeniusWeb) and in your pythonpath. Typically by adding them to your PYTHONPATH environment variable. * The profiles you want to provide to the parties (alternatively you can refer to a profile on a running profile server) * You have a settings.json file containing the [source:geniuswebcore/geniusweb/protocol/session SessionSettings] eg SAOP Settings. [source:geniuswebcore/test/resources/settings.json view example file]. * You have profiles for each party, eg jobs1.json and jobs2.json. * Run {{{python -m geniusweb.simplerunner.NegoRunner settings.json}}} * The log will be written to stdout by default. * Extract the data from the line {{{INFO:protocol ended..:}}}. It's a json structure with the final state of the session. This is identical to how it works with the [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWeb#Stand-aloneRunning java stand-alone runner]. == Limitations SimpleRunner has a number of restrictions, compared to a run using a runserver and partyserver * With stand-alone runner, your parties are run together in a single python interpreter. This implies * there may arise library version conflicts between parties. * There may be multithreading effects due to the python GIL. * You can only use GeniusWebPython-based parties, not GeniusWeb-based parties * Not all protocols are translated to python yet. You can only use protocols that have been translated. * These issues are resolved by using the partiesserver. Therefore SimpleRunner in python might behave slightly different from running on the [https://tracinsy.ewi.tudelft.nl/pubtrac/GeniusWebPythonPartiesServer python-partiesserver]. For this reason the partiesserver will be used for competitions and tests. Always make sure that your party runs properly also on the pythonpartiesserver. = Debugging For debugging you can use the normal python debugging facilities from your IDE (eg Eclipse PyDev). E.g. place a breakpoint in your code, and then run the unit test that reproduces the issue. The IDE switches to your program and you can step, inspect variables, etc. You can run your party best from a unit test, so that the fault situation is easily reproduced. But you can also use the simplerunner to run a session against some other party. == GeniusWebPython sources You can browse the GeniusWeb core sources directly using the browse button at the right top of this page. You can download the source code of this component using {{{ svn co https://tracinsy.ewi.tudelft.nl/pub/svn/GeniusWebPython }}} Normal developers that write new parties do not need to install the GeniusWeb source code. Even if you want to debug/trace into the GeniusWeb code -- for instance for debugging or understanding the inner workings of geniusWeb--, IDEs like Eclipse automatically allow this as the pip-installed libraries contain sources.